Aesthetica 3D
Crafting Your Imagination into Reality
One to Rule them all
Dive into the mystical world of gaming with our signature Dice Tower! Unleash your dice with style as they spiral down this enchanting tower. Crafted with precision and a touch of magic, our tower adds a whimsical flair to all your tabletop adventures.
Tabletop Essentials
Tabletop Essentials
Dice Jail | Doom Eternal x Punisher | Dungeons and Dragons | Tabletop Accessory | 3D Printed
£11.99
Legend has it that the doom slayer himself couldn't escape from this ancient entrapment without aid. Inspired by Doom and Punisher, you can be sure that misbehaving dice will be punished in this awesome 3D printed dice jail!
Usage is very simple, pop open the lid, condemn the treacherous dice by throwing them inside, close the lid back up and those D20s aren't going anywhere any time soon without your permission!
Lightweight and easy to carry, it makes a great addition to your other tabletop accessories, such as dice towers and initiative trackers!
Available in a few different colour combinations, please make sure to mark your selection as follows: Primary colour corresponds to the base (shown in green in photos), secondary colour corresponds to the bars and punisher logo (shown in off white in photos).
Fits all standard D20s and even larger non-standard sized D20s, as can be shown in the listing video!
It can also work with other dice types, however do note that smaller D4s / D8s may be able to slip through if pushed at the right angle.
Machine used for printing: Original Prusa i3 MK3S+
Filament used: Mystic Green and Pearl Mouse PLA, more information about the filament can be found here: https://prusament.com/materials/pla/
Digital design is an original piece of work created by me.
If you have any questions or suggestions, don't hesitate to get in touch with me!
Usage is very simple, pop open the lid, condemn the treacherous dice by throwing them inside, close the lid back up and those D20s aren't going anywhere any time soon without your permission!
Lightweight and easy to carry, it makes a great addition to your other tabletop accessories, such as dice towers and initiative trackers!
Available in a few different colour combinations, please make sure to mark your selection as follows: Primary colour corresponds to the base (shown in green in photos), secondary colour corresponds to the bars and punisher logo (shown in off white in photos).
Fits all standard D20s and even larger non-standard sized D20s, as can be shown in the listing video!
It can also work with other dice types, however do note that smaller D4s / D8s may be able to slip through if pushed at the right angle.
Machine used for printing: Original Prusa i3 MK3S+
Filament used: Mystic Green and Pearl Mouse PLA, more information about the filament can be found here: https://prusament.com/materials/pla/
Digital design is an original piece of work created by me.
If you have any questions or suggestions, don't hesitate to get in touch with me!
Dice Organiser Tray | Elven x Dwarven | Dungeons & Dragons | Tabletop Accessory | 3D Printed
£18.99
Organise and easily identify your dice types with this beatiful Elven and Dwarven motif inspired dice tray! Fits all standard dice, has organisation slots for D4, D6, D8, D10, D12, D100. Available in a variety of colours, the design comes in a sleek 2-tone format of your choosing. Never lose out on extra damage by rolling a D8 instead of a D10 ever again! (We've all been there) Customisation options for the end text are available, please see personilsation text instructions for more details! Product dimensions are 22cm x 11cm x 5cm.
If unsure about colours, please feel free to get in touch and I can send you an image with a sample print in that colour so you can get a better understanding of what the final printed piece in that colour will look like!
All products printed using an Original Prusa i3 MK3S+.
Material type used for printing is PLA, which gives a great finish. The brand of PLA used is Prusament, more information available at this link: https://prusament.com/materials/pla/
Original design created by me, the idea for a dice organiser was suggested by a previous buyer as something they would have liked to see in my store! If you have any suggestions or requests, then please feel free to get in touch with me and I can create something to fit your vision!
If unsure about colours, please feel free to get in touch and I can send you an image with a sample print in that colour so you can get a better understanding of what the final printed piece in that colour will look like!
All products printed using an Original Prusa i3 MK3S+.
Material type used for printing is PLA, which gives a great finish. The brand of PLA used is Prusament, more information available at this link: https://prusament.com/materials/pla/
Original design created by me, the idea for a dice organiser was suggested by a previous buyer as something they would have liked to see in my store! If you have any suggestions or requests, then please feel free to get in touch with me and I can create something to fit your vision!
A new AGE of PLant Pots
Tetrahex Detailing
Each layer is printed at a resolution of 0.2mm, so the final product speaks for itself when it comes to clarity and aesthetics.
Plants with style
This art-deco inspired large planter boasts interesting geometric patterns that are sure to immediately attract attention and spark conversation!
High Quality PLA
Made with reinforced 4 thick walls, powered by PLA+ from eSUN. Unparalled strength.
New Laptop? Make it stand out.
Customisable to fit any laptop or anything you’d want in that slot really, we don’t judge. Can be configured with up to 4 slots for those big power users.
IT all
starts with
a DRINK
Stylised Coaster Set of 6 | Dual Colour | Hot & Cold Drinks | Roman + Aztec Designs | 3D Printed
£14.99
Turn up the style in your living room, kitchen or outdoor garden with these stylish coasters made to withstand both hot and cold drinks. Featuring 2 distinct styles, Roman and Aztec patterns, you can be sure that whatever the drinking occassion may be, you'll look good doing it. And why stop there, make it your own and choose how many of each of the 2 styles you get with your order, by simply filling out the customisation options as per the instructions provided! Standard set of 6 coasters with each purchase. Colours can be customised, the base and top colours can be changed to your preference, by the primary and secondary colour modifiers. Primary colour affects the base, and the secondary colour affects the top detailed motifs.
Product dimensions: 10cm in diameter, 0.8cm in height
Printed using PETG polymers, which has a high heat resistance for hot and cold drinks alike. More information about the material in use can be found here: https://prusament.com/materials/prusament-petg/
Based on my own digital designs created in Fusion 360.
Product dimensions: 10cm in diameter, 0.8cm in height
Printed using PETG polymers, which has a high heat resistance for hot and cold drinks alike. More information about the material in use can be found here: https://prusament.com/materials/prusament-petg/
Based on my own digital designs created in Fusion 360.
